Custom subwoofer enclosures are for when you want to put some subwoofers into your car but don't want to run stock boxes. By a stock box, I mean one that either comes with your subwoofer or simply one where you can only fit one 12" sub.
If you buy two 12" subs, or perhaps two 10" subs for instance, you'll likely either have to build your own box or get someone to build you one. It's important to remember every subwoofer has an "optimal" subwoofer box size in order to maximize clarity and sound performance. You can check the manufacturer's website of your subwoofer to see what this optimal size is.
You can also skip building the whole optimal performance box in exchange for simply something that will fit into your trunk, but it won't sound as good as if you built one to the specs on the manufacturer's website. e holes for where the subwoofers go and drill a terminal plate int Another thing to keep in mind when building your box is to keep all edges perfectly straight. Try to use vice grips to hold the pieces in place before and after gluing, and be sure to place scrues evenly across the construction.
Use a router to machine tho the back to run the subwoofers out the back.
Even if you haven't done the greatest job on your subwoofer box, the MDF wood required to build isn't that expensive. You can always try another one, or use the one you just created. The first few boxes we created here at EuroEnclosures weren't that great either, but you can always tune your deck for less bass output if your box rattles a bit on higher DB output levels.
However, should you want to build the "optimal" box for your subwoofers, be sure to check the manufacturer website of your subwoofers before building.
Please visit our website for more on subwoofer enclosures and construction at http://www.euroenclosures.com
No comments:
Post a Comment